All-natural “green” Plasters from Italy Give Consumers Healthy Style.
The process for making pure slaked lime plasters hasn’t changed since ancient times and may take up to two years to properly slake and purify the raw lime into a finish plaster that may be applied on the interior or exterior walls of your home. To produce it, limestone is dug out from the small family-run quarries (many have been under the same ownership for hundreds of years) and is burned at 2,300 degrees to remove impurities. The resulting lime powder is placed in large vats that have holes in their sides, then immersed in water. (The Romans would bury their earthenware pots filled with cooked crushed lime near streams, which facilitated the slaking of the lime, a process where water slowly seeps into the powdered limestone converting it into a stabilized lime putty). Once slaked, the resulting lime putty is placed in airtight containers ready to be color tinted with all natural earth pigments.
Today’s homeowner can use an Italian plaster in virtually every room and surface; floors, columns, walls, ceilings and counters. Venetian plasters with the finest grains of marble are used on walls. By adding marble grains with increasingly larger microns to the lime putty, a variety of interesting designs can be achieved. Grassello is used to create fanciful flourishes and uses a fine grade of marble powder, while Travertino, because it has the largest grains, provides a rustic finish on walls and counters. Tadelakt, the smooth Moroccan plastering technique is used to create an organic look for tubs, showers, walls, ceilings, floors, fountains and furniture. It is waterproof (after waxing) and is still in use throughout Morocco today.
The cost of natural products like lime plasters is competitive with other coatings while contributing to savings in energy and upkeep. Lime plasters may be used to help qualify a structure for green certification under the LEED system established by the U.S. Green Building Council. Architects and builders can earn up to four points for using these plasters.
In addition to beautiful finishes, the remarkably durable and beautiful surfaces actually “breathe” expelling moisture throughout their lifetime. They are mold and mildew resistant and have no VOC’s so they are safe during application and for the lifetime of the structure they are placed in.