United States demand for molding and trim is forecast to exceed $10 billion in 2014 on annual increases of 10.0 percent. An expected rebound in new residential construction expenditures from their depressed 2009 level will fuel these gains.
There are many types of ceiling hangers used on today’s construction projects, including powder-actuated fastening systems, post-installed concrete anchors and eye lag screws. Other hanger types may consist of wires alone without pre-mounted fasteners, anchors or ceiling clips.
Q. On a recent project, we installed steel studs to the underside of the grid system for a suspended acoustical ceiling. I used screws to attach the runner track to the ceiling grid. I then installed my “kickers,” or permanent bracing to the structure above. I was then told to go back and remove all the temporary screws to allow the ceiling to float. Why?
A veneer plaster system is a thin coat of plaster, usually 3/32 inch, over a gypsum-based panel. The reason for specifying a veneer plaster is typically to achieve a hard, abuse-resistant monolithic surface.
RSS
