SENCO is introducing an innovative Channel Fit Nosepiece attachment for its DuraSpin auto-feed screw driving system that gives commercial construction professionals a better way to tackle metal-to-metal fastening applications, eliminating dropped screws and material waste while increasing speed and accuracy. The nosepiece was specifically developed to extend the benefits of the DuraSpin system to applications that require the tool to feed screws easily into recessed channels up to 1.8-inch deep. Typical applications include steel decking, hat channel, wall panel construction, resilient channel, metal truss assembly, window framing and aluminum extrusions. The first of its kind accessory can drive screws 1/2- to 1-inch long. There is no need to adjust the setting for varying screw lengths. The nosepiece ensures proper spacing between fasteners to prevent overlap in tight places and to comply with strict commercial codes. And, the narrow barrel design provides a clear line of sight to improve screw placement in pre-punched holes.