Convenience Products, the manufacturer of Touch ‘n Seal Insulating Foams and Sealants for new construction and retrofit applications, announces its ASTM E-84 Class 1 Flame Retardant spray foam insulations, Low Density (1 pcf) and Medium Densities (1.75pcf  and 2.0pcf) have passed the requirements of NFPA 286 (room corner fire test). These three polyurethane foams meet the requirements set forth in the 2006 IBC section 803.2.1/2009 IBC Section 803.1.2, which eliminates the need for a thermal or ignition barrier. The code approved, two-component polyurethane foam can be left exposed in commercial roof/wall junctures at a maximum of 6 inches high and 2 inches deep with unlimited length. Contact the manufacturer for details and limitations.