Curve
Corners bridge the gap between the very tight radii, achievable with trim products
and the minimum curvature that can be created by bending conventional drywall.
Initial products include 90 degree curves for internal and external corners and
180 degree bullnose corners for finishing end walls or half walls. Installation
uses the same techniques as conventional drywall including depth set screws and
existing taping and mudding techniques. The products are extremely lightweight
and durable. They are available in 8 and 10 foot lengths, 1/2 and 5/8 inch
thickness and dimensions to match both 2x4 stud walls and steel framing. They
can be specified with or without tapered edges. Additional shapes will be added
as demand dictates.
Share This Story
You must login or register in order to post a comment.
Report Abusive Comment