FramePRO 325XP 3¼” Pneumatic Framing Nailer
Senco has scored a design trifecta of size, weight, and performance with its new FramePRO 325XP 3-1/4” pneumatic paper tape framing nailer.
Weighing in at 7.9 pounds, and measuring less than 12 inches tall, it is the most compact framing nailer in the category. The low-profile design makes it easy to maneuver between wall studs and floor joists. An ergonomic over-molded comfort grip dampens recoil and reduces fatigue during prolonged use.
Delivering 780 inch-pounds of impact-energy at 100 PSI, the FramePRO drives 34-degree offset round head and clipped-head paper tape fasteners ranging from 2 to 3-1/4 inches long (.113 to .148 in diameter) into any substrate, including engineered lumber.
With its durable external aluminum housing and internal metal components (high-strength steel driver blade and aluminum firing valve), the FramePRO is built to handle the rugged demands of framing, sheathing, truss building, sub-flooring, and deck building in any climate.
The tool features a thumbwheel adjustable depth-of-drive and a patented tool-free selectable trigger so users can easily switch between bump-fire and single shot modes. A metal toe-nail safety digs into the substrate so the nailer won’t slip when firing. A dry-fire lockout mechanism extends bumper life by preventing the tool from actuating when the magazine is empty.
Additional features include a retractable rafter hanger and a quick and easy two-step loading process.
The FramePRO 325XP is available at Lowe’s and through professional distributors including STAFDA, dealer co-ops, lumberyards and online retailers. Visit http://www.senco.com for locations.
FramePRO 325XP 3¼” Pneumatic Framing Nailer Specifications
▪ Reg. Operating Pressure: 70-120 psi (4.8 – 8.3 bar)
▪ Air Consumption: 60 cycles per minute; 5.2 SCFM
▪ Air Inlet: 3/8” NPT
▪ Tool Weight: 7.9 lbs (3.54 kg)
▪ Tool Height: 11.9” (302mm)
▪ Tool Width: 4.5” (114mm)
▪ Fastener Capacity: 83
▪ Fastener Range: 2 - 3¼”
▪ Five-year limited warranty
▪ MSRP: $199