Air Tool to Fire Pneumatic Driven Ballistic Hardened Pins
The NPCN-7312 Air Tool fires coil ballistic hardened pins. Ranging in length from 1¼-inch through 3½-inch and sizes of .100 and .145. The power tool weighs 8.5 pounds and also drives standard 15 Deg. siding and framing nails. Applications for the tool include:
- Plywood/OSB or Cement Fiberboard/Siding to Steel Framing
- Rigid Insulation Board/Plywood to Concrete Block
- Stucco Mesh to Block Stone and Steel
- Insulation/Foam Board to Steel Studs or Concrete Foundations
For more information, visit www.jaaco.com.