Read about products from National Gypsum, RAS Specialty Toolbox Co., Capital Safety, Werner Ladder Co and more.

Dust control joint compound

National Gypsum

The ProForm XP Ready Mix Joint Compound with Dust-Tech is an all-purpose, low-dust joint treatment with enhanced mold resistance. The product is specially formulated to cause dust to fall straight to the floor, reducing airborne dust by more than 60 percent and improving indoor air quality during all phases and types of construction. In addition, the product features enhanced mold resistance to help prevent mold growth during and after the construction process. It has achieved the highest possible score for mold resistance on both the ASTM G 21 and ASTM D 3273 tests and achieved GreenGuard Children & Schools certification, the industry’s most stringent indoor air quality standard.

Scaffolding toolbox

RAS Specialty Toolbox Co.

The Sure Step Toolbox is a product that doubles as the top plank of a scaffold. It weighs less than 30 pounds empty. If workers need to get on the top step, the toolbox can be closed, locked and the toolbox becomes a plank with a non-skid surface that can easily support their weight. It has a locking mechanism that locks the toolbox shut and fastens it to the scaffold for safety. The product is designed to increase work efficiency by allowing workers a place for their tools and increase job site safety by eliminating dangerous tool-related debris from the planks of the scaffold.

Portable guardrail protection system

Capital Safety

The Portable Guardrail System offers a practical fall protection solution that is designed to prevent personnel from reaching a fall hazard. The freestanding system can be erected in minutes, requires no permanent or penetrating surface attachments and seals off areas and edges that are unprotected, offering an ideal passive fall protection solution. The guardrails are offered in 6-, 8- and 10-foot sections to fit a site’s specific needs. The new and unique lightweight bases incorporate ergonomic handles, four rail receptacles and built-in toe-board brackets that allow infinite configurations with no additional components required. In addition, a rubber pad on the bottom of each base provides skid resistance and surface protection, while splice kit, roof hatch and swing gate accessories provide added versatility. Installation of the Portable Guardrail System is quick and easy with no special tools required. Simply position the bases, insert the guardrail sections into the bases and tighten the set screws to secure in place.

Portable scaffold system

Werner Ladder Co

This lightweight portable scaffold sets up quickly, provides multiple working and has smooth gliding wheels allow it to easily haul heavy loads. With a highest standing level of 30⅛ inches and a width of 46⅛ inches it provides over a 6-foot reach, making it ideal for painting and many other projects. The 500-pound load capacity scaffold doubles as a workbench or multi-level storage and organization unit. High-grade wheels lock in place for extra safety and security. The product meets or exceeds applicable OSHA and ANSI codes and standards for strength and structural integrity.

Dust level sensing unit

Oneida Air Systems Inc.

The Oneida Dust Sentry with adjustable infrared-sensing technology has a strobe light to alert the operator when the dust reaches a preset level, indicating when it’s time to empty the container. The operator will not have to unpack a filter full of chips again because someone forgot to empty the dust drum. The product will alert you when it’s time to dump the drum.