W&C Architect will host the Webinar
“Four Barriers for Four Wetting Potentials: How to Design Successful Exterior
Wall Assemblies.” The event is presented by Len Anastasi, president of EXO-TEC
Consulting Inc., November 29 at 2:00 pm EST. The presentation will be followed
by a 15 minute Q&A with Anastasi.
This free 45-minute presentation
will discuss the four basic wetting potentials that above grade exterior wall
assemblies are subject to due to the differing climates between indoor and
outdoor climates. These barriers need to be identified and located properly
within the assembly in order for the assembly to effectively deal with the
wetting potentials. This presentation will identify these four barriers, inform
participants which barriers will deal with what potentials and show the
participants where to locate the barriers based on their physical properties in
order to design a successful exterior wall assembly.
In addition to W&C Architect,
the Webinar is also brought to you by CertainTeed, ClarkDietrich Building
Systems, Extrutech Plastics Inc., Hunter Panels, Parex USA and Total
Wall.
To register for this event, pleaseclick here.
W&C Architect Webinar on Exterior Wall Assemblies
Report Abusive Comment